Megabits to Megabytes
Enter megabits and read megabytes. One megabyte is 8 megabits, so divide by 8: a 100 Mbps connection moves at most 12.5 MB of data every second.
Formula: MB = Mbit × 0.125
One megabit in every other data size unit on this site
- Bits1,000,000 bit
- Bytes125,000 B
- Kilobytes125 KB
- Megabytes0.125 MB
- Gigabytes0.000125 GB
- Terabytes1.25E-7 TB
Megabits to MB table
| Megabits (Mbit) | Megabytes (MB) |
|---|---|
| 1 | 0.125 |
| 2 | 0.25 |
| 3 | 0.375 |
| 4 | 0.5 |
| 5 | 0.625 |
| 6 | 0.75 |
| 7 | 0.875 |
| 8 | 1 |
| 9 | 1.125 |
| 10 | 1.25 |
| Megabits (Mbit) | Megabytes (MB) |
|---|---|
| 12 | 1.5 |
| 15 | 1.875 |
| 20 | 2.5 |
| 25 | 3.125 |
| 30 | 3.75 |
| 40 | 5 |
| 50 | 6.25 |
| 60 | 7.5 |
| 75 | 9.375 |
| 100 | 12.5 |
From internet speed to download time
Internet plans, speed tests and router specs measure throughput in megabits per second. Files are measured in megabytes. To estimate a download, divide the speed by 8 to get megabytes per second, then divide the file size by that figure. A 300 Mbps line gives 37.5 MB/s, so a 2 GB game update takes about 53 seconds under ideal conditions.
Real transfers lose some capacity to protocol headers, encryption and Wi-Fi interference, and the server on the other end may be slower than your line. A result around 80 to 90% of the ideal is normal on a wired connection.
Streaming services list their bandwidth needs in megabits per second as well. A video stream that needs 25 Mbps uses about 3.1 MB every second, or roughly 11 GB per hour, which matters on a capped mobile plan.
Quick formula
MB per second = Mbps ÷ 8Why speeds are sold in bits
Data travels down a wire or a radio link one bit at a time, so network hardware has always been rated in bits per second. Storage, on the other hand, is organized in bytes. Neither side is trying to inflate its numbers; they simply count different things.
Once you have megabytes, MB to GB shows how much of a data cap a download uses, and bits to bytes covers plain bit counts without a prefix.
Mobile carriers and phone settings mix the two again: a plan advertises speed in Mbps but meters usage in MB and GB. Divide by 8 whenever you cross from one side to the other.
Megabits to MB questions
How many megabits are in a megabyte?
Eight. A byte is 8 bits, and both units use the same decimal mega prefix, so 1 MB equals 8 Mbit.
How fast is 100 Mbps in MB per second?
12.5 MB/s at the very most. Protocol overhead, Wi-Fi conditions and the server's own speed usually keep real downloads a bit below that.
At 50 Mbps, how long should a 1 GB file take to download?
50 Mbps is 6.25 MB/s, and 1 GB is 1,000 MB, so the ideal time is 160 seconds, about 2 minutes 40 seconds. Expect a little longer in practice.
Is Mbps the same as MBps?
No. Mbps or Mb/s is megabits per second; MBps or MB/s is megabytes per second, which is 8 times more data.
From the blog
Social & Mobile · 10 min read
Why Phone Videos Are So Big, and How to Compress One Sensibly
Resolution, frame rate, HDR and codec decide how big a phone video gets. Here is what each setting costs and the order that shrinks a clip with the least visible loss.
Image Guides · 10 min read
Reduce Image Size in KB for Signatures, Photos and Scans
A signature, a face photo and a scanned certificate each fail in their own way when you shrink them. Here is the order of steps for each, and how to read the KB window a form gives.
